TU-1800PC系列紫外可见分光光度计英文操作说明书

TU-1800PC系列紫外可见分光光度计英文操作说明书

Specifications

Installation:

After carefully unpacking the contents, check the materials with the packing list (page 5) to ensure that you have received everything in good condition.

Place the instrument in a suitable location away from direct sunlight.  In order to have the best performance from your instrument, keep it as far as possible from any strong magnetic or

electrical fields or any electrical device that may generate high-frequency fields.  Set the unit up in an area that is free of dust, corrosive gases and strong vibrations.

Remove any obstructions or materials that could hinder the flow of air under and around the instrument.

Use the appropriate power cord and plug into a grounded outlet.

Turn on the spectrophotometer. Allow it to warm up for at least 15 minutes before taking any readings.We suggest you then do the Calibrate System with the Search 656. 1nm to set the

wavelength to the deuterium lamp emission line.