avigation
智能崩解仪 ZB-1
智能崩解仪是根据2020版《中国药典》对片剂、胶囊剂、及丸剂进行崩解时限检测的药检仪器。
技术指标:
△ 温度预制范围:室温~50℃,显示显示分辨率为0.1℃。
△ 温度控制精度:±0.3℃
△ 定时预制范围:1min~900min
△ 时间控制精度:±0.5min
△ 工作噪声:<60db
△ 升降吊篮数量:1套
△ 吊篮升降频率:(30~31)次/分
△ 吊篮升降距离:(55±1)mm
△ 筛网至杯底较 小间距:25mm±2mm
△ 筛网孔径:标配2mm、(0.425mm、1mm孔径可选定)
△ 电 源:220V50Hz
△ 整机功率:600W
△ 外形尺寸:长*宽*高 260mm*300mm*440mm
主要特点:
① 1套吊篮。
② 仪器自动控制水浴温度为37.0℃(药典规定)。高精度数字电子传感器,无需校准即可保证水浴温度的高精度和高准确度。
③ 仪器自动设定吊篮升降时间为15分钟,也可任意重新设定。
④ 采用单片机为核心的计算机控制技术,智能化控制水浴温度、工作时间两个性能参数。
⑤ 仪器具有监控水浴温度过热报警和自动保护功能。

ZB-1 Disintegration Time Limit Tester
Disintegration time limit tester is a drug test instrument to test the disintegration time limit of tablets, capsules and pills in accordance with Chinese Pharmacopoeia.
Technical indexes:
△ Temperature prefabrication range: room temperature:~50℃, display resolution:0.1℃.
△ Temperature control accuracy: ±0.3℃
△ Timing prefabrication range: 1min~900min
△ Time control accuracy: ±0.5min
△ Work noise: <60db
△ Number of lifting baskets: 1 set
△ Lifting frequency of basket: (30~31) times/min.
△ Lifting distance of basket: (55±1) mm
△ Minimum spacing from screen to beaker bottom: 25mm±2mm
△ Mesh size: standard configuration 2mm, (optional for 0.425mm and 1mm bore diameters)
△ Power supply:220V50Hz
△ Total power:600W
△ Overall dimensions:L*W*H 260mm*300mm*440mm
Main features:
① 1 set of basket.
② The instrument controls the bath temperature at 37.0℃ automatically (prescribed by Pharmacopeia). High-precision digital electronic sensor is adopted to ensure the high precision and high accuracy of water bath temperature without the need for calibration.
③ The instrument sets the lifting time of baskets to be 15min automatically, which can also be reset at any time.
④ It adopts the computer control technology which is centered on SCM to control two performance parameters including bath temperature and working time intelligently.
⑤ The instrument can monitor bath temperature, give over-temperature alarm and protect itself automatically.
上一条:没有了
下一条:T 型旋转粘度计标准操作